Products:

Kromatica
Replica
Non-Precious
   Ceramic Alloys
Vest-All
SuperVest
SuperVest RF
SuperVest PC
High Fusing
   Solder Paste
Preformed Wax
    Sprues
Porcelite Kit

SuperVest

Product No. Packaging
501-600 150 x 60gm with 4 bottles of liquid
502-600 150 x 60gm without liquid
501-900 100 x 90gm with 4 bottles of liquid
502-900 100 x 90gm without liquid
500-150 60 x 150gm with 4 bottles of liquid
502-150 60 x 150gm without liquid
500-120 12 x 1 kg with liquid
502-120 12 x 1 kg without liquid
500-010 Special Liquid (16 oz)
500-020 High Expansion liquid (16 oz)

 

  • The old classic investment for alloys, it works all the time.
  • Controlled expansion means exact fit and precise margins.
  • Perfect for ring and ringless systems.
  • Creamy, smooth consistency provides castings that are virtually bubble-free.
  • Freeze stable liquid available.


SuperVest
Fine Grain, Carbon Free, Phosphate Bonded Investment
Technique Instructions


Powder to Liquid
SuperVest is suitable for both ring and ringless casting systems. This investment is specifically designed for all types of metal alloys and therefore dilution is required. Total volume of solution used is as follows: 60 gm -> 14.5 cc and 90 gm -> 21.5 cc. Depending on the alloy you use, you should dilute the special liquid by following the recommended ratio.


A: Powder to SuperVest Special Liquid (Clear)

Non-Precious 12.5 cc Liquid 2.0 cc Water 60 gram pkg
Semi-Precious 10.0 cc Liquid 4.5 cc Water 60 gram pkg
Precious 11.0 cc Liquid 3.5 cc Water 60 gram pkg
       
Non-Precious 18.5 cc Liquid 3.0 cc Water 90 gram pkg
Semi-Precious 14.5 cc Liquid 7.0 cc Water 90 gram pkg
Precious 15.5 cc Liquid 6.0 cc Water 90 gram pkg

To increase expansion, use more special liquid and less water. To get less expansion, use less special liquid and more water. Keep the total volume of the solution constant. If you cannot get enough expansion, order SuperVest High Expansion Liquid (Blue Color).


B: Powder to SuperVest High Expansion Liquid (Blue)

Non-Precious 11.0 cc Liquid 3.5 cc Water 60 gram pkg
Semi-Precious 8.0 cc Liquid 6.5 cc Water 60 gram pkg
Precious 8.0 cc Liquid 6.5 cc Water 60 gram pkg
       
Non-Precious 16.0 cc Liquid 5.5 cc Water 90 gram pkg
Semi-Precious 12.5 cc Liquid 9.0 cc Water 90 gram pkg
Precious 12.5 cc Liquid 9.0 cc Water 90 gram pkg



Mixing and Investing
For best results, liquid and powder should be between 70-78F. Incorporate powder into liquid and hand spatulate for 10-15 seconds. Vacuum mix for 90-120 seconds and then vibrate and break vacuum. Vibrate the investment into the casting ring using a brush to fill critical areas before filling ring. Bench set for 45-60 minutes for normal burnout. Bench set for 15-25 minutes for fast burnout.

 

Kromatica        Replica        Non-Precious Ceramic Alloys        Vest-All        SuperVest        SuperVest RF
SuperVest PC        High Fusing Solder Paste        Preformed Wax Sprues       Porcelite Kit


Copyright 2003 All Rights Reserved.
Matech, Inc., 13000 San Fernando Rd, Sylmar, CA 91342 USA
ph. (800)292-6620          info@matechinc.com